IMPORTANT: Remove spacesaver and any nails / staples
prior to installation of backbox / speaker
(13
3/4
”)
350mm
(17
7/
8
”)
455mm
St
ap
le
/ nai
l t
o
jois
t
St
ap
le
/ nai
l t
o
jois
t
spacesaver & drywall cutout
template
Tape speaker cable here or loop
through the two holes to secure
Amina Technologies Ltd (UK)
Cirrus House, Glebe Road, Huntingdon
Cambridge, PE29 7DL, UK
T: +44 (0) 1480 354390
F: +44 (0) 1480 356564
E: [email protected]
W: www.amina.co.uk
Contacting Amina in the United States
P: 1-866 462 6462
F: 1-888-329 2491
E: [email protected]
W: www.aminatechnologies.com
Using the spacesaver
For pre-install
As a cutout template
01
/ Staple / nail to joists.
0
2
/ Ensure cutout dimensions fit between
the
joists.
0
3
/ Secure the speaker cable in position.
01
/ Ascertain joist positions behind
plasterboard / drywall.
0
2
/ Ensure cutout dimensions fit between
the
joists.
0
3
/ Mark the corners of the cutout
using the slots provided.
Contact
Before installing your AIW series loudspeaker please refer to the
Installation Guide for full details.
(7
7/8
”)
205mm
26
Spacesaver information
01
Using the spacesaver for pre-install
The Evolution Series spacesaver is designed
to be pinned/taped to joist work prior to the
plasterboard/drywall being fitted.
Your speaker cable can then be secured to
the spacesaver using the holes provided.
There are two ways to secure the speaker
cable in position. The first is to pull the cable
through one (or both) of the holes and tape
in position.
The other method is to again pull the cable
through the two holes, loop and tie the cable
in position.
01
Using the spacesaver as a cutout template
For installations where the
plasterboard/drywall is already in place, the
spacesaver can be used purely as a hole
cutout template.
Carefully mark the corners of the cutout
using the four slots provided.
02
02
IMPORTANT: Remove spacesaver and any nails / staples
prior to installation of backbox / speaker
(13
3/4
”)
350mm
(17
7/
8
”)
455mm
St
ap
le
/ nai
l t
o
jois
t
St
ap
le
/ nai
l t
o
jois
t
spacesaver & drywall cutout
template
Tape speaker cable here or loop
through the two holes to secure
Amina Technologies Ltd (UK)
Cirrus House, Glebe Road, Huntingdon
Cambridge, PE29 7DL, UK
T: +44 (0) 1480 354390
F: +44 (0) 1480 356564
E: [email protected]
W: www.amina.co.uk
Contacting Amina in the United States
P: 1-866 462 6462
F: 1-888-329 2491
E: [email protected]
W: www.aminatechnologies.com
Using the spacesaver
For pre-install
As a cutout template
01
/ Staple / nail to joists.
0
2
/ Ensure cutout dimensions fit between
the
joists.
0
3
/ Secure the speaker cable in position.
01
/ Ascertain joist positions behind
plasterboard / drywall.
0
2
/ Ensure cutout dimensions fit between
the
joists.
0
3
/ Mark the corners of the cutout
using the slots provided.
Contact
Before installing your AIW series loudspeaker please refer to the
Installation Guide for full details.
(7
7/8
”)
205mm
