5
Unpacking
Unpack the unit.
Retain this User Guide. If you pass the
unit on to a third party make sure you
pass on the User Guide.
Retain the packaging. If you dispose of
it, do so having regard to any recycling
regulations in your area.
NOTE: Do not remove any of the following
from the BackboxSW before installation -
• The six foam pads fixed to the
speaker supports (these should never
be removed).
• The Plastic trim surrounding the front
edge of the BackboxSW.
NOTE: The denim absorption pad will
need to be temporarily removed from the
backbox during installation, but should
be retained to go back in just before the
speaker is installed into the backbox.
Contents
The carton should contain:
• BackboxSW (200, 300 or 345)
• Template
• Denim absorption pad (packed loose
inside the BackboxSW)
• Flange-head screws x 4
• Installation guide
If any items are missing or damaged,
contact your supplier immediately.
Overview
1. Speaker mounting tabs with foam pads
2. Cable grommets
3. Mounting slots
4. Plastic alignment trim
5. Denim pad (shown cutaway)
a
a
a
a
a
a
b
b
b
b
b
c
c
b
d
e
