Installing the Backboxes continued...
05
Secure the speaker
With the speaker resting on the
backbox mounting lip, use screws
provided to secure the speaker onto the
backbox by self tapping into the
mounting lip, through the pilot holes
provided at each corner.
Ensure the speaker face is flush with the
front of the plasterboard and that
everything is firmly held in position.
Shims may be necessary.
Amina backboxes (BackboxCV345 and
CV200) are designed for 12.5mm (1/2”)
plasterboard.
Shims can be supplied to adapt the
backbox for different plasterboard
thicknesses. Contact your supplier
when ordering.
IMPORTANT: at this point you should
perform the first set of speaker tests to
check for correct cabling and to
identify any sources of buzz and rattle
in the building construction.
03
screw though
here
12.5mm
Side View
03
