Plastering and decorating continued...
03
04
Plastering
Use standard finishing plaster for large
areas. For patch plastering use a low
shrinkage repair plaster such as British
Gypsum Easi-fill®
Please refer to the appropriate page
in Section B (alignment and plastering
preparation for your specific installation
type). Pages 13 - 17
Important: To ensure proper operation and
sonic performance, no more than 2mm
(5/64”) of plaster must be applied to the
surface of the panel.
For non-standard plater types please
contact Amina or your distributor
Decorating
Allow your plasterwork to dry completely.
Test the speaker again (see Section C,
page 18). You can then paint the surface or
hang wallpaper in the usual manner.
Amina invisible speakers have been
optimised for three coats of emulsion once
plastered. Additional coats will cause very
small reductions in the maximum sound
pressure levels achievable.
D
Note:
Amina have separate guides for
information about installing the
product behind other materials and
surfaces such as wooden panels,
acrylic and melamine laminates.
Contact Amina if you require any
additional information (page 29)
05
20
