FCC Caution
Any changes or modifications not expressly approved by the responsible party could void the user's
authority to operate this equipment.
Notice:
This module in its final integration requires the end-product to continue to comply with DFS requirements.
A class II permissive change may be required for operation not already described in the FCC Grant filing.
A regulated power supply will need to be used with this module and may be subject to further
FCC testing.
OEM Labeling Requirements
Notice: The OEM of final integrator must ensure that FCC labeling requirements are met.
For a host using this module, if (1) the module’s FCC ID is not visible when installed in the host, or (2) if
the host is marketed so that end users do not have straightforward commonly used methods for access to
remove the module so that the FCC ID of the module is visible; then an additional permanent label
referring to the enclosed module should be used, with the following contents: Contains FCC ID:
.
The host OEM user manual must also contain clear instructions on how end users can find and/or access
the module and the FCC ID. The applicable usage is to be used as a wireless device, connected to the back
of a professional camera and transmitting live video, coming from BNC connectors
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not in-stalled and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation.
FCC Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1)
This device may not cause harmful interference, and
(2)
This device must accept any interference received, including interference that may cause
undesired operation.
T
HE ANTENNA USED FOR TRANSMISSION MUST BE INSTALLED TO PROVIDE A SEPARATION DISTANCE OF AT LEAST
20
CM FROM ALL PERSONS AND MUST NOT BE CO
-
LOCATED OR OPERATING IN CONJUNCTION WITH ANY OTHER
ANTENNA OR TRANSMITTER
.
