Operating modes
Aerial mode
In this mode a link is established between a single receiver and a single transmitter. This mode uses
DFS frequencies as well making it flexible and easy to adjust to all different fields of use and to meet
the regional and national frequency requirements and laws.
For some SkyLink version the message "please wait 60 seconds" may appear on the monitor when the
link is first established to inform the user that the system is searching for a free DFS frequency. In this
case this message will be followed by a second identical message to inform that the system is
searching for an alternative DFS frequency. Upon completion the message "Ready" will appear on the
monitor.
In Aerial mode a link can be established only if the systems are within close proximity to each other. If
either receiver or transmitter is reset, both sides must be brought close together and reset in order to
re-establish the link.
Operating Frequencies
FREQUENCIES [MHz]
DESCRIPTION
5190
Non-DFS
5230
Non-DFS
5270
DFS
5310
DFS
5510
DFS
5550
DFS
5590
DFS
5630
DFS
5670
DFS
5755
Non-DFS
5795
Non-DFS
