Amigo HD, Operational Manual

Page: 5 / 28

ADJUSTING YOUR AMIGO
To adjust your Amigo to a comfortable driving position, you can alter the handle, seat and armrests as follows:
EZ-Tilt Handle Adjustment
To adjust the angle of the handle, turn the adjustment lever counterclockwise. Move the handle to the desired position. Tighten the
adjustment lever by turning it clockwise (Figure 3). The placement of the spring-activated adjustment lever, itself, can be moved
out of the way for your comfort. Pull the adjustment lever straight out. Turn in either direction. Release adjustment lever at desired
placement (Figure 4).
DO NOT USE THE ADJUSTMENT LEVER AS A FOOT REST. SUCH USE MAY CAUSE THE ADJUSTMENT LEVER TO LOOSEN
THE HANDLE AND CAUSE PERSONAL INJURY.
Seat Installation
1. Unlock the seat lock.
2. Insert the upper seat post into the opening of the lower seat post.
3. Spin seat around to make sure it rotates freely.
4. To lock the seat, pull the seat lock lever toward the rear of the seat.
Adjusting Seat Height Without a Power Seat Lift
To adjust seat height, remove the nut and screw that holds the seat collar in place on the
seat post, then adjust and reinstall in the desired hole on the seat post (Figure 5).
IT IS RECOMMENDED THAT THE SEAT LOCK BE INSTALLED IN THE SECOND HOLE POSITION FROM THE SEAT ON A
FOLDING SEAT AND THE PREMIER II SEAT.
Seat Lock Lever
This allows the seat to rotate 360 degrees and lock in any position desired. The seat lock
lever is a bar with a vinyl cap on its end, located under the seat (Figure 6). Push the lever
forward to rotate to any position. Lock seat during vehicle operation.
Adjustable Armrest Width
The armrest width is determined by loosening the armrest knobs and tightening them
when the arms are at the desired width.
Flip-Up Armrest
By pulling up on the end of either armrest, the armrest will flip back for easy transfer in and out of the Amigo.
www.myamigo.com 5
Figure 3 Figure 4
Figure 6
Figure 5