Electrical Connections
AMICO Circulator doesn't need an external motor protection.
Check if voltage and frequency are consistent with values in the pump
plate.
The circulator is working when the control-panel-light turns on.
If the power cord is damaged, it must be replaced.
Protection fuse: 1A.
Electrical Connection
Electric Cable
Max diameter 10mm
Min diameter 5mm
Insert the cables
in the correct or-
der
Cable is
0,75mm
WARNING!
AMICO Circulator must be connected to the ground wire.
The pump must be connected to an external power switch.
The min. clearance between the electrodes should be 3mm.
7
14
The pump is equipped with the function S3, self purging function. After
the start of this setting, the air in the pipes (cause of noise and malfunc-
tions) wears off after a few minutes.
10. Relations between pump setting and performance
Such reports shall be expressed in the diagram below.
Expulsion of air
It means running
for 5 minutes
Do not start the pump without pumping liquid.
Do not start the pump before expelling the air in the pipes.
Summary of Contents for AMICO 20-4-130
Page 2: ......
