Amico Gamma 40 LED Operating And Maintenance Instructions Manual Download Page 18

18

     Amico Lighting Solutions

 www.amico.com

 www.amico.com

Architectural Lighting Solutions (Solar Series, Skyline Series, Lunar Series, 

LightMaster) 

Amico Lights Corporation warrants its products against defective materials and workmanship for twelve (12) months from the 
date of shipment. Within this period, Amico Lights Corporation will repair or replace any part on site or at the factory which is 
proven to be defective at Amico Lights Corporation’s cost.

Furthermore, Amico Lights Corporation will warrant its material to be free from defect for an additional period of four (4) years 
(five [5] years from the date of shipment). Within this period, Amico Lights Corporation will replace any part at no charge, which is 
proven to be defective. Shipping and installation costs after the first twelve (12) months will be borne by the customer.

The warranty applies to normal usage and does not apply to any product that has been subject to alteration, abuse, negligence, 
or use (including voltage and/or current) other than that for which the product was designed.

Medical Lighting Solutions (Mira Series, Gamma Series, Clarity Series, Magna 

Series)

Amico Lights Corporation warrants its products against defective materials and workmanship for twelve (12) months from the 
date of shipment. Within this period, Amico Lights Corporation will repair or replace any part on site or at the factory which is 
proven to be defective at Amico Lights Corporation’s cost.

Furthermore, Amico Lights Corporation will warrant its material to be free from defect for an additional period of four (4) years 
(five [5] years from the date of shipment). Within this period, Amico Lights Corporation will replace any part at no charge, which is 
proven to be defective. Shipping and installation costs after the first twelve (12) months will be borne by the customer.

The spring arms for the above mentioned are warranted for a period of twelve (12) months. The warranty for the spring arms shall 
include parts and labor and shall commence from the date of shipment.

The warranty applies to normal usage and does not apply to any product that has been subject to alteration, abuse, negligence, 
or use (including voltage and/or current) other than that for which the product was designed.

Amico Lights Corporation shall not be liable for incidental or consequential damages resulting from the use of the equipment.

All claims for warranty must first be approved by Amico Lights Corporation. A valid Return Goods Authorization (RGA) number 
must be obtained from Amico Lights Corporation prior to commencement of any service work. Warranty work which has not 
been pre-authorized by Amico Lights Corporation will not be reimbursed.

Amico Lights Corporation 85 Fulton Way, Richmond Hill, ON L4B 2N4, Canada

600 Prime Place, Hauppauge, NY 11788, USA

Tel: 905.764.0800 | Fax: 905.764.0862

Warranty Policy - Lighting Products

Summary of Contents for Gamma 40 LED





















Reviews: