Select additional functions or wash cycle parameters as required –
depending on the needs,
Press the Time Remaining button.
Select time remaining ranging from 1 to 24 hours.
Press the Start/ Pause button The appliance will be set in delay mode.
The wash programme will be automatically terminated.
End of the wash cycle is indicated by acoustic signal (if active). 30
seconds after the end of the wash programme , END appears on
the display, washing machine turns off automatically, the display
turns off, the door is unlocked and the washing machine will be in
off mode).
Close the water valve.
Unplug the appliance from the mains.
Open the door and remove laundry.
Press and hold the Pause button for 3 seconds to reset a programme.
3
4
End of the wash cycle
Cancel or modify programme
Close the appliance door.
Set the programme selector dial to the desired programme (see table).
2
Time Remaining
To set the Time Remaining:
When you set the Time Remaining option, the display will show the time remaining to the end
of the programme.
USING THE APPLIANCE
Set the programme selector turning it left or right.
Customize the programme to your needs – you can change the temperature,
spin speed, or enable additional features.
Press the Start/ Pause button
1
Select Programme
29
