![background image](http://html1.mh-extra.com/html/amica/wms814/wms814_operating-instructions-manual_2932884026.webp)
26
Press Start/Pause to start or pause a programme. During the washing cycle the
corresponding programme phase symbol is flashing. In Pause mode, the symbols do
not flash and are lit up continuously. The Pause mode can be used to soak the laundry.
The Acoustic Signal On/Off is activated by simultaneously pressing and holding:
Temperature selector and Spin Speed buttons for about 3 seconds.
This function locks function buttons to prevent settings being changed or operation
interrupted by children. Pres and hold Rapid Wash and Options buttons for 3 seconds
to activate the Child Lock during a washing cycle. To release Child Lock during the
cycle, hold the same buttons down once more for around 3 seconds.
To set the Favourite programme turn the knob on any programme and set
temperature, spin speed and additional functions. Then, press and hold down the
Temperature button for about 3 seconds to confirm the Favourite programme setting.
When saved, the setting will ne now always available under Favourites. You can
change the Favourite programme as many times as you want. The default is the Cotton
programme.
9
4+5
7+8
Start/Pause button
Acoustic Signal On/Off
Child Lock
Select a favourite programme.
When If the Child Lock function is activated, the display will show the symbol. When you turn
off or unplug the washing machine or the washing cycle ends, the Child Lock function will not
deactivate.
Under the Start/Pause button there is the
Add+ option button (allowing you to add
laundry during the programme, such as pants, shirts or socks). Washing machine clearly
indicates when you can add more laundry.
The Add+ option is the perfect solution for all those who are forgetful! You can open
the door during the wash cycle, so that you add or remove laundry even a long time
after the programme has started. The LED indicator on the Control Panel indicates
pausing a programme is possible. When can stop the programme and add the laundry,
the display flashes the icon
Add+. If the temperature is below 60°C and the water
level below the door seal, you can stop the programme by pressing the Start/Pause and
then instantly unlock door to add laundry. The available options will be communicated
through quick flashing of the relevant indicator (until programme progresses to 70-
80%). Although this option is available for almost the entire duration of the programme
it is recommended that you use it in the first 30 minutes to maximize the results.