![background image](http://html1.mh-extra.com/html/amica/wa-14-ex/wa-14-ex_operating-instructions-manual_2932866023.webp)
23
Choose the appropriate wash programme as required, depending on the soil level,
and type and amount of laundry loaded, which ensures better results and more
effective washing. Once the wash programme is started, turning the programme
selector knob to another position is indicated by a beep, however it does not
change the previously selected programme.
Large and easy to read display provides instant access to information about
each programme. During appliance operation the display shows the approximate
remaining wash time. The display also shows these symbols: door locked
, Child Lock
and options (extra rinse
/ pre-wash
. The displayed
time is an estimate and may differ from actual wash cycle time, depending on
temperature, water pressure, load size, quantity of washing powder used etc. The
time is automatically updated during wash cycle. Displaying the same time for an
extended period or abrupt changes are normal.
1
2
Programme selector dial
Display
This button allows the washing temperature to be set in different programmes.
Press this button to display water temperature settings available for a given
programme or an option for washing in cold water (no heating). Depending on
the selected programme, the display will show the following settings: - - °C (cold
water), 20°C, 40°C, 60°C, 90°C.
5
Temperature selector button
Press this button to set the spin speed when water is being pumped out of the
washing machine. Press the spin butto. To change the settings. Depending on
the programme selected, the display shows the following values: 0 (no spinning),
400, 600, 800, 1000, 1200, 1400. The spin speed affects the noise level and
residual humidity: the higher the spin speed during the spin phase, the higher the
noise level and the lower residual humidity.
4
Spin speed selector button
Set the Delay function:
1. Select a programme;
2.Press the Delay button to choose the time(the delaying time is 0-24 H.);
3.Press [Start/Pause] to commence the delay operation
Cancel the Delay function:
Press the [Delay] button until the display be 0H.It should be pressed before
starting the programme. If the programme already started, should switch off
programme to reset a new one.
Delay button
3