21
DESCRIPTION OF THE APPLIANCE
Appliance components (Fig. 1, item ...)
1. Wheels
2. Power button
3. Cord retractor button
4. Air exhaust
5. Power smooth control knob
6. Dust bag full indicator
7. Cover lock
8.Hose socket
OPERATION (Fig. 3)
Attachments (Fig. 2. item...)
(1) Telescopic tube
1
(2) Allpurpose suction brush
1
(3) Bookdusting brush (2 in 1)
1
(3) Suction head for narrow spaces
(2 in 1)
1
(4) Dust paper bag 2l
1
(5) Hose
1
(6) EPA12 filter
1
(7) Suction head for upholstery
1
EN
Preparing for vacuuming
Always unplug the appliance before attach
-
ing or removing attachments!
l
Attaching flexible hose: insert the hose end into
the inlet port. Push until the end falls into place
with an audible click (Fig. 3, item 1).
l
Removing the hose: press buttons on the hose
end, unlatch and remove the hose from the inlet
port (Fig. 3, item 2).
l
Connect the telescopic tube with the hose (Fig.
3, item 3) and the proper attachment (Fig. 3, item
5), slide open the telescopic tube to a suitable
length (Fig. 3, item 4).
l
Grab the plug and pull the power cord while
holding the appliance body, plug into a power
outlet.
l
Before you start vacuuming, extend power cord
cable to sufficient length and insert the plug into
the wall socket. The yellow mark on the power
cord indicates it is extended almost all the way.
When you see the red mark do not pull the power
cord any further.
l
Switch on the appliance with the on / off button.
(Fig. 3, item. 6).
l
Set the desired appliance power with the power
control knob. (Fig. 3, item. 8).
l
After finishing using the appliance, press the on/
off button to turn off the vacuum cleaner (Fig. 3,
item 6).
l
Unplug the cord from the wall outlet.
l
Retract the power cord by pressing cord re
-
tractor button (Fig. 3, item 7). For this opera
-
tion hold the cord to prevent it from tangling or
bumping the plug on the vacuum cleaner hous
-
ing.
l
Disconnect the suction cleaning head from
the tube and disconnect the telescopic tube
from the hose. (Fig. 3, item. 3, 5).
l
Close the telescopic tube (Fig. 3, item. 4).
The vacuum cleaner may be stored in a vertical or
horizontal position. The hose can remain attached
to the vacuum cleaner, but please be careful not to
bend it too much during storage.
Summary of Contents for VM 1055
