19
DESCRIPTION OF THE APPLIANCE
Appliance components (Fig. 1, item ...)
1. Handle
2. Hose socket
3. Hinged Cover
4. Dust bag full indicator
5. Appliance model / power
6. Power smooth control knob
7. Cord retractor button
8. Air exhaust
9. Brush unit handle
10. Power button
11. Appliance body
12. Wheels
13. Sideguards
14. Bottom cover
OPERATION (Fig. 3)
Attachments (Fig. 2. item...)
(1) All-purpose suction brush
1
(2) Suction head for upholstery
1
(3) Suction head for narrow spaces
(2 in 1)
1
(3) Bookdusting brush (2 in 1)
1
(4) Parquet suction brush
1
(5) Turbo-brush
1
(6) Hose
1
(7) Telescopic tube
1
(8) Dust bag included
1
(9) Turbobrush *
1
Always unplug the appliance before attaching or removing attachments!
l
Attaching flexible hose: insert the hose end into the inlet port. Push until the end falls into place with
an audible click (Fig. 3, item 1).
l
Removing the hose: press buttons on the hose end, unlatch and remove the hose from the inlet port
(Fig. 3, item 2)
l
Connect the telescopic tube with the hose (Fig. 3, item 3) and the proper attachment (Fig. 3, item
4/5/6), slide open the telescopic tube to a suitable length.
l
Grab the plug and pull the power cord while holding the appliance body, plug into a power outlet.
l
Switch on the appliance with the on / off button (Fig. 3, item 7).
l
Set the desired appliance power with the power control knob.
l
After finishing using the appliance, press the on/off button to turn off the vacuum cleaner (Fig. 3,
item 7).
l
Unplug the cord from the wall outlet.
l
Retract the power cord by pressing cord retractor button (Fig. 3, item 8). For this operation hold the
cord to prevent it from tangling or bumping the plug on the vacuum cleaner housing (Fig. 3, item 9).
l
Disconnect the suction cleaning head from the tube and disconnect the telescopic tube from the
hose.
l
Close the telescopic tube
The vacuum cleaner may be stored in a vertical or horizontal position. The hose can remain attached
to the vacuum cleaner, but please be careful not to bend it too much during storage. Brushes are
stored on the handle in the rear of the vacuum cleaner (Fig. 3, item 9).
EN
* applies to the model VM 5021 (Solano Turbo)
