20
Grill on bottom heating please, the top plate at 90°
1). Plug in the appliance to the wall outlet, you will hear a beep and
will flash.
2). Set the lid to the 90° open position, press the
button.
3). Press the
button, use the +/– to set the temperature to 150°C - 160°C - 170°C - 180°C - 190°C
- 200°C - 210°C and press
to confirm. The appliance will pre-heat for approximately 2 minutes 30
seconds. As soon as the target temperature is reached, the display will stop blinking, you will hear a beep
and you can place the food.
NOTE:
When the appliance operates in
mode, you cannot set the grilling time.
NOTE:
Do not change the position of the lid while grilling. If you change the position to other than 90°, the
upper heating plate will start to heat automatically.
Grill with heating plates with the lid adjustable using the handle
1). Plug in the appliance to the wall outlet, you will hear a beep and
will flash.
2). Close the lid and adjust as need using the handle (fig. 1, item 2), then press the
button.
3). Select the desired mode
and then press
to confirm. The
appliance will pre-heat for approximately 2 minutes 30 seconds. After preheating, the display will show
"RUN" and you will hear a beep. Lift the lid, put the food on the bottom plate, close the lid. When finished
you will hear another beep, and the mode sequence will be displayed again. If you do not select any
mode, the appliance will turn off automatically after approximately 1 hour.
NOTE:
Press
to select one of the sequence “Rare, Medium Rare, Medium, Well-Done” and them
press
to confirm.
NOTE:
If you select
from the displayed sequence.
1). Use the +/– to set the temperature of both heating plates, just one temperature will be displayed.
2). When the appliance operates in
mode, you cannot set the grilling time.
NOTE:
“RUN” message will be displayed for
only.
Grill on both heating plates that are fully open at 180° - as a flat bed grill
1). Plug in the appliance to the wall outlet, you will hear a beep and
will flash.
2). Press the lid lock release button (Fig.1 item 8) and set the lid to the fully open position at 180°
3). Turn on the appliance
, press
,
to adjust the temperature of the top and bottom heating
plate. Use +/– to adjust the temperature 150°C - 160°C - 170°C - 180°C - 190°C - 200°C - 210°C- OFF
and then press
to confirm. The appliance will pre-heat for approximately 2 minutes 30 seconds. As
soon as the target temperature is reached, the display will stop blinking, you will hear a beep. Place the
food on the grill plates.
NOTE:
When the appliance operates in
mode, you cannot set the grilling time.
4). After use, unplug the appliance from the wall outlet. Leave to cool for about half an hour. Remove the
heating plates and drip tray, wipe clean, allow to dry and store.
OPERATION
Summary of Contents for ProfiGrill GK 5011
