17
THE APPLIANCE’S CONSTRUCTION AND FEATURES
Before use:
For the first time to use or no use for a long time, it is recommended that you fill to the maximum level
mark with fresh tap water, boil and empty the kettle at least 2 times to clear kettle of any tiny particles.
Do not drink such water.
Use:
1. Press the lid lock on the handle, and you can open it.
2. Remove the kettle from the base to the filling place. Fill the kettle with desired amount (no less than
the minimum and no more than the maximum.) Put back the lid; place the kettle back on the base unit.
3. Connect the plug into a power outlet (220-240V, AC), switch the kettle on by pressing the switch.
The light will illuminate to indicate the kettle is heating.
4. The kettle will automatically switch off once the water has boiled and the neon light goes off.
5. Lift the kettle from the base, and you can pour out the water into container.
Detailed description of the selected kettle features: (Fig. 2)
1). Operation
a). Programme 1 Boil water (100°C) Press Start to turn on the kettle.
Kettle operation is indicated by the indicator (1) at the top of the display. You will hear three beeps
when programme completes.
b). Programme 2: Heat the water to the set temperature. Use the Setting button to select the tempera
-
ture of 70°C - 80°C - 90°C - 100°C - 40°C - 60°C and press Start to turn on the kettle. Kettle operation
is indicated by the indicator (1) at the top of the display. You will hear three beeps when programme
completes.
c). Programme 3: Heat the water to the set temperature and keep warm for one hour. Use the Setting
button to select the temperature of 70°C - 80°C - 90°C - 100°C - 40°C - 60°C and press Keep warm
button to turn on the kettle. Kettle operation is indicated by the indicators (1+2) at the top of the di
-
splay. You will hear three beeps when programme completes.
d). Programme 4: Boil the water (100°C) and keep warm for one hour. Use the Setting button to select
the temperature of 70°C - 80°C - 90°C - 100°C - 40°C - 60°C and press Keep warm button twice. Ket
-
tle operation is indicated by the indicators (1+2+3) at the top of the display. You will hear three beeps
when programme completes.
2. When Boil-dry Protection is triggered (after approximately 15 seconds), the kettle will not turn on
until it cools down (naturally or when cold water is poured in).
OPERATION, CLEANING AND MAINTENANCE
Appliance's parts (Fig. 1)
1. Spout
2. Lid
3. Lid opening button
4. Water gauge
5. Handle
6. Menu
7. Button
8. Power base
Summary of Contents for KM 5011
