44
DEFROSTING, WASHING AND MAINTENANCE
Replacing the interior light bulb
In case that the light bulb is out of function it
is easily to replace. First make sure that the
refrigerator / freezer is disconnected from the
power supply by removing the plug. Take a
flat screwdriver and keep it carefully without
force into the left gap between lamp cover
and internal cabinet. Then press the handle
of the screwdriver carefully to the left side
until you notice that the left pin of the cover is
disengaged . Repeat this procedure on the
right gap, however now press the handle of
the screwdriver carefully to the right side. If
both sides are loosened the cover can be
removed easily.
Ensure that bulb is screwed securely in the
bulb holder. Plug the appliance into the po
-
wer supply. If the light still fails, replace E14
screw-cap type 15 Watt (Max) bulb from your
local electrical store and then fit it. Carefully
dispose of the burnt-out light bulb
immediately. If you have changed the light
bulb please fix the cover again in it’s former
position. Take care that the cover snaps-in
correctly.
Do not use bulbs of greater or
smaller power, apply only the
bulbs of parameters given abo-
ve.
