Amica FK321.3DF, Instruction Manual

Page: 13 / 24

13
OPERATION AND FUNCTIONS
EN
START
Testing
1. Clean the parts of the refrigerator with lukewarm
water containing a little neutral detergent and with
clear water, and wipe them dry.
Notes: Electric parts of the refrigerator can only be
wiped by dry cloth.
2. Turn on electricity. The compressor begin to
work.
3. Open the door 30 minutes later, if the tempe-
rature in the refrigerator decreased obviously, it
shows that the refrigerator system works well.
When the refrigerator operates for a period of time,
the temperature controller will automatically set the
temperature within limits it opens.
The display is located in the middle of the refrige-
rator door. Please refer to the below figure for the
layout.
introduction of the buttons
1 Fridge: to set the refrigerator temperature
2 Freezer: to set the freezer temperature
3 Function: to choose functions of fast cooling, fast
freezing, SmartECO and vacation
4 OK: to enter or to quit the existing function
Function setting
Appliance connected to power at the first time
When the appliance is connected to power at
the first time, the display will be lit for 2 seconds
before going normal and the appliance runs with
SmartECO function.
Display control
When the refrigerator door is closed and there is
no button operation in 3 minutes, the display light
goes off.
When the display light is off, open the refrigerator
door or click any button to light it up.
Temperature setting
1) Click the “refrigerator” or “freezer” button and
when it flickers in the symbol, temperatures can
be set; each time when the button is clicked, the
temperature changes accordingly (the display
shows the temperature accordingly). (Temperatu-
res cannot be set under functions of fast cooling,
fast freezing, SmartECO and vacation,)
2) Under temperature setting, if there is no button
operation in 5 seconds, the button stops flickering
and the set temperature comes into effect.
3)Temperature cycle
Refrigerator: 2
O
C→ 3
O
C→ 4
O
C→5
O
C→ 6
O
C→
7
O
C→ 8
O
C→ OFF→ 2
O
C
Freezer: -24
O
C→ -23
O
C→ -22
O
C→ -21
O
C→
-20
O
C→ -19
O
C→ -18
O
C→ -17
O
C→ -16
O
C→ -24
O
C
SmartECO
Under SmartECO, it is 4
O
C in the refrigerator and
-18
O
C in the freezer.
Temperatures cannot be changed and you can
click the temperature zone button to check the
temperature.
1) To enter SmartECO
Click “option” until it flickers and then click “OK” to
enter this function.
2) To quit SmartECO
Under SmartECO, click “option” until it goes to
SmartECO, click “OK” to quit this function and the
light goes off.
Temperatures of each chamber go back to the
value before SmartECO function.
Control panel (Fig. 10). Fast cooling
Under fast cooling, it is 2
O
C in the refrigerator and
the refrigerator temperature cannot be changed.
1)To enter fast cooling
Click “option” until it flickers in “fast cooling” and
then click “OK” to enter this function.
2) To quit fast cooling
Under fast cooling, click “option” until it goes
to “fast cooling” and then click “OK” to quit this
function.
The light in fast cooling goes off and the refrigera-
tor temperature goes back to the value before fast
cooling.
Fast freezing
Under fast freezing, refrigerator temperature can
be set but not for the freezer temperature.
1) To enter fast freezing
Click “option” until it flickers in “fast freezing” and
then click “OK” to enter this function.
2) To quit fast cooling
Under fast freezing, click “option” until it goes
to “fast freezing” and then click “OK” to quit this
function.
The light in fast freezing goes off and the freezer
temperature goes back to the value before fast
freezing.
When fast freezing time is up (26 hours), it quits
automatically.
When it goes to SmartECO, fast freezing stops.
Vacation
Under vacation, it is 14
O
C in the refrigerator and
the temperatures in this chamber cannot be
changed.
1) To enter vacation
Click “option” until it flickers in “fast freezing” and
then click “OK” to enter this function.
2) To quite vacation
Under vacation, click “option” until it goes to “vaca-
tion” and then click “OK” to quit this function.
The light in vacation goes off and the refrigera-
tor temperature goes back to the value before
vacation.
Vacation quits under functions of SmartECO and
fast cooling.
Power off memory
With this design, the refrigerator can automatically
keep all the setting in case of power off. When the
unit is plugged in again, the refrigerator will run
with the setting before power off.
Power-On Delay
To prevent harm to the refrigerator in case of
sudden power cut and power on, the unit does not
start immediately if the power off time is less than
5 minutes.
Freezer over-temperature alarm (only in case of
power on)
When the freezer temperature is higher than 10
O
C
at the first time connected to power, the symbol
light of the freezer chamber goes on and the num-
ber representing temperature flickers.
Press any button or wait for 5 seconds, flickering
stops and it goes back to the temperature that was
set.
Refrigerator door opening alarm
When the refrigerator is open over 3 minutes, the
buzzer will buzz. Close the door or press any but-
ton to stop the alarm, but for the latter, the alarm
will go off again after 3 minutes.
Sensor fault alarm
When it shows “E0”, “E1”, “E2” or other abnormal
symbols, it means sensor faults and the refrigera-
tor needs repair.