Amica FK320HSW, Operating Manual

Page: 21 / 28

21
Trouble-shooting
Problems Possible causes Remedies
The appliance does
not work
Electric circuit rupture - check whether the plug is properly inserted
into the socket
- check whether the power cable of the
appliance is not damaged
- check whether there is voltage in the
socket, by plugging another appliance, e.g.
a night lamp
Lighting inside the
chamber is not wor-
king and an error
message ‘dr’ appears
on the display, infor-
ming of the opened
door.
The bulb is loose or
fused
Wrong location of the
reflecting element/ab-
sence of the reflecting
element
- see the point above “The appliance does
not work" – fit the bulb correctly or replace
it.
- Glue the reflecting element in compliance
with the dimensions given in fig. 19 and
19a, (see p. 16)
Temperature inside
the appliance is not
low enough
The ambient tempera-
ture is higher or lower
than the SN-T climate
range
- the appliance is adapted to operation in the
SN-T climate range (see page 25).
The appliance is located
at the sunlit place or
near the heat sources
- move the appliance to another place.
Observe the guidelines contained in the
manual
Too much warm food
loaded at a time
- wait 72 hours until the food becomes cool
(freezes) and the required temperature is
reached inside the chamber
Internal air circulation
hindered
- place the food and containers in such a
way that they do not touch the rear wall of
the fridge
The air circulation at the
back of the appliance is
hindered
- move the appliance min. 30 mm away
from the wall
The door of the frid-
ge/freezer are opened
too often and/or remain
open for too long
- reduce the frequency of opening the door
and/or shorten the time when door remains
open
The door does not close
completely
- place the food and containers so that they
would not interfere with door closed