17
•
The plug should be fully accessible at all times.
•
Ensure ventilation openings are kept clear.
•
Do not use a multi-plug adaptor in the socket
to connect this appliance alongside other
appliances.
•
Do not tilt the fridge beyond 45º.
•
Do not exert excessive pressure on the
appliance.
•
Ensure that there is a gap of no less
than 10cm above and to the sides of the
appliance to allow for ventilation. The
clearance between the sides and adjacent
furniture must also allow the doors to
open fully. Note that a greater side gap will
be required if the appliance is to be positioned next to a wall to
allow the doors to open fully.
•
A gap of 7cm should be allowed for ventilation between the
rear wall and the back of the appliance. There is a plastic guide/
stopper supplied with the appliance that should be fitted when
aligning the appliance with a wall.
Place the guide into the condenser
and turn it by 90° (Fig 6). The guide
will then lock into place. Take
extreme care not to damage the
condenser whilst doing this. The
guide will protect the condenser
and ensure a minimum air gap.
Fig. 5
Appliance dimensions
595
1660
540
Fig. 6
