![background image](http://html.mh-extra.com/html/amica/egspv-593-910/egspv-593-910_operating-instructions-manual_2932402029.webp)
TURN ON THE APPLIANCE AND SELECT PROGRAMME
29
Turn on the appliance
1. Slide out the upper and lower the basket, place the dishes inside and slide baskets back in
the dishwasher.
It is recommended to first load the lower basket and then the upper basket.
2. Pour detergent.
3. Insert the plug into the wall outlet. Power data can be found on the product sheet. Make
sure that the water supply is turned on and set to the maximum pressure.
4. Open the door, press the on/off button.
5. Select the desired programme and its indicator will light up. Close the door. Dishwasher will
start.
1
2
Change programme
You can change the programme only if it runs for a short time. Otherwise the detergent
is already dissolved in water and the water could be pumped out. In this case, refill the
dispenser with detergent and start the washing program from the beginning. To reset your
dishwasher, please follow the instructions below:
1. Open the door to stop the washing program. You can open the door completely when
spray arms come to a stop.
2. Press and hold the Programme button for more than 3 seconds The appliance will go into
standby.
3. Now you can select your desired programme.
3
Add dishes during the programme:
You can add extra dishes at any time before detergent is released. In this case, follow the
instructions below:
1. Open the door to stop the washing program.
2. You can open the door completely when spray arms come to a stop.
3. Add the dishes.
4. Close the door.
5. The dishwasher will start.
WARNING!
Be careful when opening the door during the dishwashing programme as hot
steam can be released and cause scalding.