Amica AWN612D, Instruction Manual

Page: 13 / 28

13
USING THE APPLIANCE
II. Start delay setting
The delayed start function may be used when, for example, taking advantage of discoun-
ted energy tariffs.
Procedure:
1. Close the door.
2. Set the programme selector knob to the desired programme (see the table further on).
3. Select additional functions or wash cycle parameters as required.
4. Press the Start delay button
5. Select time ranging from 0.5 to 23 hours. The display will show the setting from 30min.
to 23h.
6. Press the [Start/ Pause] button. The appliance will be set in delay mode. Washing will
commence immediately after the delay time has elapsed.
Note: If a delay start time has been set, the display will show only the delay time in hours
and the symbols will be illuminated. Once the delay time has elapsed, the selected
wash programme will start and the display will show the remaining time and the symbol.
III. End of the wash cycle
1. When the wash programme has ended End will be displayed and the symbol.
2. Turn off the water valve
3. Set the programme selection knob to
4. Unplug the appliance from the mains.
5. Open the door and remove the laundry.
IV. Cancelling and changing programme
Set the programme selector knob to position for several seconds to terminate a pro-
gramme. Then select the desired wash programme.
Note: When you cancel a programme when there is water in the drum and turn the pro-
gramme selector knob to a different position, the appliance will drain the water. Then select
the desired wash programme.
I. Programme selection
1. Set the programme selector knob to the desired programme (see the table further on).
2. Change temperature, spin speed or activate available additional functions to modify the
programme to your individual needs.
3. Press the [Start/ Pause] button. The programme will start after about 6 seconds, once
door lock is engaged.