13
USING THE APPLIANCE
II. End of the wash cycle
1. Indicator lights to indicate wash cycle has ended.
2. Turn off the water valve
3. Set the programme selection knob to .
4. Unplug the appliance from the mains.
5. Open the door and remove laundry.
III. Cancelling and changing programme
Set the programme selector knob to position for several seconds to terminate a
programme. Then select the desired wash programme.
NOTE:
When you cancel a programme when there is water in the drum and turn
the programme selector knob to a different position, the appliance will drain
the water. Then select the desired wash programme.
I. Select Programme
1. Set the programme selector knob to the desired programme
(see the table further on).
2. Change temperature, spin speed or activate available additional functions to
modify the programme to your individual needs.
3. Press the [Start/ Pause] button
