103
EN
Troubleshooting
All repairing operations required for your machine should be
carried out by an authorised service company. If your machine
requires a repair or if you cannot solve an issue with the
information provided below, then you should:
• U
nplug the machine.
•
Close the water tap.
•
Contact the nearest authorised service company.
(*) See page 98
Your machine
will not start.
No water is
entering the
machine.
Start/Pause button
is not pressed.
Press the start/pause
button.
The program knob
is in stop (off)
position.
Bring the program knob on
the desired position.
The door off your
machine is not
closed properly.
Close the door of your
machine.
Your fuse is defective.
Check the water
inlet hose.
Water inlet hose
may be blocked.
Valve inlet filter is
blocked.
The door of your
machine is not
closed properly.
Close the door of your
machine.
Clean the water inlet hose
filters.(*)
Clean the valve inlet filters.
(*)
Change your fuse.
Water inlet hose may be
twisted.
It is not plugged in.
Your tap is closed.
Insert the plug into the socket.
Open the tap.
Mains supply is cut off.Check the mains supply.
FAULT
POSSIBLE CAUSE REMOVING METHODS
Summary of Contents for AWDS914DJ
