12
Removing the shelves
•
To remove a shelf from the wine cooler, first remove all bottles
from the shelf, then pull the shelf forwards until the groove on
either side of the shelf is level with the plastic peg on either side
of the cabinet (as shown in Fig 2). Then lift the shelf up and pull
forwards.
•
To replace the shelves,
follow the steps above in
reverse order.
Cleaning
•
Do not use abrasive
products or detergents
. After washing, rinse and dry thoroughly.
•
The exterior of the appliance and the door seal should be
cleaned using mild soapy water and dried thoroughly.
•
The interior cabinet should be cleaned using a solution of
bicarbonate of soda and lukewarm water.
•
Clean the shelves separately by hand using soap and water. Do
not put them in the dishwasher.
•
Ensure that the cloth is only moist when cleaning the control
panel and electrical parts, and that all water is thoroughly
dried off before reconnecting the power
.
•
Once cleaning is
complete, reconnect the mains electrical supply.
•
If the appliance is not to be used for prolonged periods of
time, unplug and clean the appliance thoroughly. The door
should be left slightly ajar to prevent the formation of odours or
condensation.
Fig. 2