15
The metal casing of this appliance has been coated with a
preservative to protect it during transport and storage. This
should be removed during installation by using a non-abrasive
stainless steel cleaner. Always follow the instructions given
with the cleaner being used. Please ensure that there is no
power being supplied to the appliance whilst you do this.
When correctly installed, your product meets all safety
requirements laid down for this type of product. However,
special care should be taken around the rear of the appliance
as these areas are not designed nor intended to be touched
and may contain sharp or rough edges that could cause injury.
Always wear adequate Personal Protective Equipment (PPE).
Ducting and ventilation
For best performance and lowest noise output, we recommend the
use of 125mm ducting. 100mm ducting may be used but this will
reduce performance and increase the noise of the extractor.
Note:
• We recommend that you seek the help of another individual
when installing this product.
• The fixings supplied are suitable for most installations. It is
the responsibility of the installer to ensure that the fixings are
suitable for the ceiling type in the property.
• Please cover any hob, or surface below the area in which the
extractor is to be installed, so that no damage befalls it.
INSTALLATION
Summary of Contents for AEP60BL
Page 19: ...19 ...