16
Separate oven lighting
By setting the knob to this posi-
tion, the lighting inside the oven is
switched on. Use, for example, when
washing the oven chamber..
Grill heater on
Setting the knob to this position
allows dishes to be grilled on the
grate or rotisserie.
bottom heater on
When the knob is set to this po-
sition, the oven is heated using
only the bottom heater. Use for,
e.g. final baking from the bottom.
OPERATION
Oven functions and operation.
Natural convection oven
(conventional)
Possible knob positions
Switching on the oven is indicated by two
signal lights, yellow and red, turning on. The
yellow light turned on means the oven is work-
ing. If the red light goes out, it means the oven
has reached the set temperature. If a recipe
recommends placing dishes in a warmed-up
oven, this should be not done before the red
light goes out for the first time. When baking,
the red light will temporarily come on and go
out (to maintain the temperature inside the
oven). The yellow signal light may also turn
on at the knob position of “oven chamber
lighting”.
Top heater on
When the knob is set to this po-
sition, the oven is heated using
only the top heater, e.g. use for,
final baking from above.
The oven can be warmed up using the bottom
and top heaters, as well as the grill. Operation
of the oven is controlled by the oven function
knob – to set a required function you should
turn the knob to the selected position,
as well as the temperature regulator knob
– to set a required function you should turn
the knob to the selected position.
The oven can be switched off by setting both
of these knobs to the position “
”/“
0
”.
Caution!
When selecting any heating function (switch-
ing a heater on etc.) the oven will only be
switched on after the temperature has ben
set by the temperature regulator knob.
0
bottom and top heaters on
Setting the knob to this position
allows the oven to be heated
conventionally.