43
CLEANING AND MAINTENANCE
Dismounting the side racks
Dismounting the side racks
Ovens marked with the letter
D
are equipped
with easily removable wire guides (side racks)
of oven inserts. To remove them for washing
purposes, pull the front catch (Z1), then tilt
the guide and remove it from the rear catch
(Z2). After washing the guides, put them in
the mounting holes of the oven and press the
catches (Z1 and Z2).
Z2
Z1
Oven types marked with the letter
K
in the
model number are equipped with liners co-
vered with special self–cleaning enamel. The
enamel removes fat stains or leftover food
automatically, providing they are not dried
on and burnt (food and fat remnants should
be removed when they are not dried on and
burnt to avoid a long self–cleaning process).
To activate self–cleaning switch on the oven
for 1 hour, setting the temperature to 250°C.
If remnants of food are small the process can
be shortened.
If the self-cleaning per for mance is no ticeably
reduced, replace the liners with new ones:
take out the wire rails from the in side and
unscrew the catalytic enamel screw from the
center of the liner. New liners can be obtained
at service outlets.
Removal of catalytic liners
Ovens types marked with the letters
Dp
in
the model number have moveable stainless
telescopic runners attached to the side racks.
The runners should be taken out and washed
along with the side racks. Before putting
trays on the telescopic runners they should
be pulled out (if the oven is warmed up the
runners should be pulled out by hooking the
back edge of trays on the bumpers in the front
part of the telescopic runners) and then insert
them together with a tray.
Important!
Do not wash telescopic shelf supports
in a dishwasher.
Removing telescopic shelf supports
Installing telescopic shelf supports