3. Part : INSTALLATION AND PREPARATIONS FOR USE
13
Oven Injector:
The oven burner is fixed in its cradle by a single clip that is placed on the left-
hand side of the burner. Pull the clip
(Figure 12)
further left, and with your
other hand, lift the burner up holding from the thermocouple/spark plug holder.
The injector is placed on the right side of the burner cradle
(Figure 13)
. Repeat
the same procedure for both Main and Top Oven (if present) burners.
Remove the injectors with a 7mm spanner and replace the injector with the
ones from the spare set, with corresponding diameters suitable to the type of
gas that is going to be used, according to the information chart (which is also
supplied in the gas conversion kit).
Figure 11
Figure 10
Screw
Figure 12
Figure 13
Clip
Injector