45
OPERATION
Automatic operation
If the oven is to be switched on for a specified
period of time and switched off at a fixed hour
then you should set the operation time and
the operation end time:
l
Press sensor
MENU
until the display will
show:
l
Set the required time using the sensors
<
and
>
within a range from 1 minute to
10 hours.
l
Press sensor
MENU
until the display will
show:
l
Set the switch–off time (operation end
time) using sensors
<
and
>
, which is
limited to a period of 23 hours and 59
minutes from the current time.
l
Set the oven function knob and the tem-
perature regulator knob to the setting at
which you want the oven to operate.
The function AUTO is now on; the oven will
start operating from the point when the differ
-
ence between the set operation end time and
the operation duration time occurs (e.g. the
operation time is set to 1 hour, the operation
end time is set to 14.00, so the oven will start
working automatically at 13.00).
When the oven reaches the operation end
time it will switch off automatically, the alarm
will be activated and the function AUTO will
start flashing again.
l
Set the oven function knob and the tem-
perature regulator knob to the switched–
off position.
l
Press sensor
MENU
,
<
and
>
in order to
switch off the signal; the signal function
will go out and the display will show the
current time.
Caution!
In ovens equipped with one control knob,
the oven function knob is integrated with the
temperature regulator knob.
l
Set the oven function knob and the tem-
perature regulator knob to the switched–
off position.
l
Press sensor
MENU
,
<
and
>
in order to
switch off the alarm; the function AUTO
will go out and the display will show the
current time.
Cancel settings
Timer and automatic function settings may
be cancelled at any time.
Cancel automatic function settings:
l
press sensors
<
and
>
simultaneously,
Cancel timer settings:
l
press sensor
MENU
to select timer set-
tings,
l
press sensors
<
and
>
again,
Change the timer beeps
The tone of the timer beeps may be
changed as follows:
l
press sensors
<
and
>
simultaneously,
l
select “tone” function with the
MENU
sen-
sor, the display panel will start to blink:
● with the
>
sensor press the appropriate
sensors from 1 to 3 to select the option
you wish.
Summary of Contents for 10143.4eETsDpHaJVQaW
Page 64: ......
