Amibot Animal Premium, User Manual

Page: 17 / 230

15
Operating the robot
EN
Press the AUTO button to validate the time (Figure 3). A beep indicates
that the time is set.
NOTES:
• If no action is performed for more than 15 seconds when setting the time, the
robot leaves the setting mode.
• Press the AUTO button to validate the time, otherwise it will not be set.
Figure 1
Figure 2
Figure 3
Press the CLOCK button on the
top of the appliance for around
3 seconds (Figure 1). The robot
beeps and the display screen
flashes.
Use the up/down arrows to
modify the hour and minutes
(Figure 2). Press the CLOCK
button to switch from hours
to minutes, then the day of the
week and 12/24 hr display.
Press the Mapping Mode button
to switch between 12 hr and
24 hr display. Press the Mapping
Mode button once to set the
12 hr display; "ON" appears on
the screen. Press the Mapping
Mode button again to switch to
24 hr mode; "OFF" appears on
the screen.