amiad Spin Klin Nova Angle, Installation, Operation & Maintenance Instructions Manual

Page: 16 / 103

16 Installation & Operation Manual Spin Klin™ Nova 910101-001009 | 01.2021
Technical Specifications – Spin Klin
TM
Nova
General data 3” Spin Klin
TM
Nova Single 4” Spin Klin
TM
Nova Dual 6” Spin Klin
TM
Nova
Trio
Max. flow rate (130μ)* 50 m 3 /h (220 gpm) 100 m 3 /h (440 gpm) 150 m3/h (660 gpm)
Min. operating pressure when cleaning
1.5 bar (22 psi)
Max. operating pressure 10 bar (145 psi)
Operating temperature 5-60°C
Filtration area 1,760 cm
2
(272 in
2
) 3,520 cm
2
(544 in
2
) 5,280 cm
2
(816 in
2
)
Inlet/Outlet diameter
3” (80 mm)
Grooved
coupling /
Universal flange
4” (100 mm)
Grooved coupling /
Universal flange
6” (150
mm)
Universal flange
Weight (empty) 54 kg (118 lb) 115 kg (253 lb) 156 kg (344 lb)
* Consult Amiad for optimum flow depending on filtration degree and water quality.
ELECTRONIC CONTROL (ADI-P, SINGLE UNITS ONLY) ELECTRONIC CONTROL (ADI-X)
Control power supply
4 x AA type 1.5V batteries / External 7-
14V DC Control power supply
4 x D type 1.5V batteries /
External 7-14 VDC
Solenoid operation data 9-12V DC latching solenoid Solenoid operation data 9-12 V DC latching solenoid
DP switch Integral sensors DP switch Integral sensors
FLUSHING DATA (AT 1.5 BAR, 22 PSI) CONSTRUCTION MATERIALS
Exhaust valve 3” (80 mm) Grooved coupling Filter housing and lid RPA (Reinforced Polyamide)
Flushing time 18 sec Discs PP (Polypropylene) or PA
(Polyamide)
Reject water volume per flush
cycle
36 liters (9.5 gallons) Cleaning mechanism All-polymeric
Flushing flow rate 7.2 m
3
/h (44 gpm) Exhaust valve All-polymeric
When the pressure on downstream is over 6 bar during backwash, installing an orifice
valve in the drain manifold is recommended
to prevent damage to the SK spines.
Flow Rate (130 micron)
3” Single 4” Dual 6” Trio
m³/h gpm m³/h gpm m³/h gpm
W
a
te
r Qu
a
lit
y
GOOD
50 220 100 440 150 660
AVERAGE
40 176 80 352 120 528
POOR
35 154 70 308 105 462
VERY POOR
25 110 50 220 75 330
Availability of disc type and micron size
Micron 10
20 40 55 70 100 130 200
400
PP / PA (Nylon) 2”
Discs
PP PP, PA PP, PA PP, PA PP, PA PP, PA PP, PA PP, PA PP
CCM
Clogging
W
a
te
r Qu
a
lit
y
GOOD
>15
AVERAGE
5 - 15
POOR
2.5 - 5
VERY POOR
1.5 - 2.5