amiad ADI-X IOM Installation, Operation & Maintenance Instructions Manual Download Page 64

Page: 64 / 83

Amiad Water Systems - ADI-X IOM 910101-001180 / 06.2021

To set the controller parameters using

ADI-X Mobile

application:

ADI-X Mobile

application.

Enter the "Sites" screen and select the site to set parameters.

Click " " to open "Settings" menu.

Figure 52: ADI-X mobile application. Go to Settings menu

Click "Technician Settings" and enter 4-digit code (1234) to access Technician Settings.

Notice: Do not change any of these settings if you are not fully familiar with the specific

filtration system, filter type, and controller. Incorrect settings may lead to nonoperational

system.

Make sure to click “Save” after changing any of the settings.

Summary of Contents for ADI-X IOM




















































































Search results

Summary of Contents for ADI-X IOM

Reviews:

Related manuals for ADI-X IOM

Brands by name

Popular brands

amiad ADI-X IOM, Installation, Operation & Maintenance Instructions Manual

Search results

Summary of Contents for ADI-X IOM

Reviews:

Related manuals for ADI-X IOM

Brands by name

Popular brands