amiad ADI-X IOM Installation, Operation & Maintenance Instructions Manual Download Page 62

Page: 62 / 83

Amiad Water Systems - ADI-X IOM 910101-001180 / 06.2021

To share the site using ADI-X Mobile application:

ADI-X

Mobile application.

On "Sites manger" screen click the "Share" icon on the site you want to share.

Click the "Invite" icon in the upper right corner to send a new invitation.

In the “Invite” window, enter the email address of the user you want to share your site

with. Click "OK". The invitation has been sent.

Figure 49: ADI-X mobile application. Site sharing

In the account you shared with an invitation notification will appear on the "Sites Manager"

screen. Click "ACCEPT" to accept the invitation. The site will appear in the list of linked sites.

Figure 50: ADI-X mobile application. Accept invitation

Summary of Contents for ADI-X IOM




















































































Search results

Summary of Contents for ADI-X IOM

Reviews:

Related manuals for ADI-X IOM

Brands by name

Popular brands

amiad ADI-X IOM, Installation, Operation & Maintenance Instructions Manual

Search results

Summary of Contents for ADI-X IOM

Reviews:

Related manuals for ADI-X IOM

Brands by name

Popular brands