AMI MI890, User Manual

Page: 35 / 62

BIOS SETUP
MI890 User’s Manual 31
Security Settings
This setting comes with two options set the system password. Supervisor
Password sets a password that will be used to protect the system and Setup utility.
User Password sets a password that will be used exclusively on the system. To
specify a password, highlight the type you want and press <Enter>. The Enter
Password: message prompts on the screen. Type the password and press <Enter>.
The system confirms your password by asking you to type it again. After setting a
password, the screen automatically returns to the main screen.
To disable a password, just press the <Enter> key when you are prompted to enter
the password. A message will confirm the password to be disabled. Once the
password is disabled, the system will boot and you can enter Setup freely.
BIOS SETUP UTILITY
Main Advanced PCIPnP Boot
Security
Chipset Exit
Security Settings
Install or Change the
Password.
<- Select Screen
↑↓ Select Item
Enter
Change
F1 General Help
F10 Save and Exit
ESC Exit
Supervisor Password : Not Installed
User Password : Not Installed
Change Supervisor Password
Change User Password
Boot Sector Virus Protection [Disabled]