background image

3-3

Chapter 3: BIOS setup

3.2 

Main menu

When you enter the BIOS Setup program, the 

Main

 menu screen appears, giving 

you an overview of the basic system information.

Refer to section 

3.1.1 BIOS menu screen

 for information on the menu screen 

items and how to navigate through them.

3.2.1 

System Time [xx:xx:xx]

Allows you to set the system time.

3.2.2 

System Date [Day xx/xx/xxxx]

Allows you to set the system date.

Version 2.15.1236. Copyright (C) 2012, American Megatrends, Inc.

BIOS Information

  R1.0 (EQ87MA10) (02/14/2014)
BIOS Vendor 

American Megatrends

Core Version 

4.6.5.4

Compliancy 

UEFI 2.3.1; PI 1.2

System Date

 

  [Mon 01/19/2009] 

System Time 

  [17:03:24]

Access Level 

  Administrator

Set the Date. Use Tab 

to switch between 

Date elements.

Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.

Main

    Advanced    Chipset    Boot    Security    Save & Exit

 : Select Screen

:  Select Item

Enter: Select

+-: Change Opt.

F1: General Help

F2: Previous Values

F3: Optimized Defaults

F4: Save and Exit

ESC: Exit

Summary of Contents for EMB-Q87A

















































Reviews: