Page 5 of 8
26683851
REV. A
13.
Carefully route the SATA/DATA and SATA power cables from the motherboard thru the
access slots for the hard drive. Route the remaining (4) pin ATX power cable, COM to I/O
and the front panel harnesses thru the access slots for the AMI View I/O board.
14.
Check harness routing for pinch points or fan interference. Install the computer core cover
and AMI I/O board cover with the same screws removed in Step # 4.
15.
Secure the SATA hard drive 22219001 (Item #2) to the SATA Mounting Adapter Bracket
40980802 (Item #3) using the (4) #4-40 x 1/4 screws 80351604 (Item #9) as shown in Figure
6.
Figure 6
16.
Install the adapter bracket and hard drive assembly to the Computer Core with (4) #6-32 x ¼
screws ST-06348 (Item #10) as shown in Figure 7. Connect the SATA power cable and the
SATA/Data Cable to the hard drive as shown in Figure 7.
Figure 7
HARD
DRIVE
#4-40 ¼ SCREWS
(TWO ON
EITHER SIDE)
ADAPTOR
BRACKET
SATA/DATA
AND POWER
CONNECTIONS
HARD
DRIVE
ASSEMBLY
