manualshive.com logo in svg

AMI CPC-2245 Series, User Manual

Share
Download
AMI CPC-2245 Series User Manual Download Page 45

36

CPC-2245  User's Manual

3.4

Advanced BIOS features

The screen below appears when choosing the "Advanced BIOS
Features " item from the main menu. It allows  the user to config-
ure the CPC-2245 according to his particular requirements. Below
are some major items that are provided in the Advanced BIOS
FEATURES setup screen.

A quick booting function is provided for your convenience.
Simply enable the Quick Power On Self  Test item to save yourself
valuable time.

Figure 3-3: BIOS features setup screen

Virus Warning

While the system is booting up, and after boot-up, any attempt to
write to the boot sector or partition table of the hard disk drive will
halt the system. In this case, a warning message will be displayed.
You can run the anti-virus program to locate the problem.

If Virus Warning is disabled, no warning message will appear if
anything attempts to access the boot sector or hard disk partition.

Summary of Contents for CPC-2245 Series
















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands