AMI Entertainment Megatouch FireFly, Installation & Owner'S Manual

Page: 28 / 52

COPYRIGHT © 2010 AMI ENTERTAINMENT NETWORK, INC.
MEGATOUCH FIREFLY OWNER’S MANUAL PM0773-01 25
FIGURE 13 - HARD DRIVE SELF
DIAGNOSTICS SCREEN
To enter this screen, touch “Show
Details” on the Hard Drive Self
Diagnostics Screen
FIGURE 14 - SHOW DETAILS SCREEN
FIGURE 15 - ATTRIBUTE RATING POP-UP
SCREEN
Hard Drive Self Diagnostics
Your FireFly’s hard drive is equipped with the
S.M.A.R.T. (Self-Monitoring, Analysis, and
Reporting Technology) monitoring system,
which helps predict hard drive failure and avoid
system crashes by collecting hard drive data
and recording errors. The test can be initiated
manually, as described below, but also runs
automatically when the game is turned on or
software is installed. A warning will appear
during software installation if there are hard
drive issues that may hinder installation or
cause damage to the game.
To initiate the test and access the reports,
touch Hard Drive Self Diagnostics on the
Diagnostics Menu. The next screen displays
the hard drive S.M.A.R.T. test result as having
“PASSED” or “FAILED”, and allows you to
show or hide diagnostics details. With the
Show Details option selected, the screen dis-
plays the status of each hard drive attribute
being monitored. Hide Details shows only the
overall test result.
Reports
Each attribute displayed on the S.M.A.R.T.
report will show a grade of “PASSED”, “FAIL-
ING NOW”, or “FAILED IN THE PAST”, deter-
mined by the attribute’s rating in relation to its
given threshold. By touching the green “ ? ” to
the left of each entry, operators can view the
grade and rating of that attribute in the pop-up
window. If the rating is above the threshold,
the attribute has “PASSED”; if the value is be-
low the threshold, it is “FAILING NOW”; and if
the attribute was previously but is no longer
below the threshold, it has ”FAILED IN THE
PAST”. Press OK at the pop-up to return to
the list of attributes.