18
2.2 Fix the anchor bolts.
Drilling the hole for the anchor bolt with the rotary hammer drill, type the anchor
bolt into the ground, use shim to adjust it to level and then fasten it with ratchet
spanner
(See Fig. 32).
Note: The twisting force of anchor bolt is 150N.m, the length inside ground of
anchor bolt must be over 6”.
F. Install runway connecting bar
(See Fig. 33).
Drilling
Clearing
Bolting
Tighten
87A/87B
Fig. 32
For the lifts
：
use
3/4” driller to drill hole
For the control cabinet
：
use
3/8” driller to drill hole
Fig. 33
6
”
39