13
V. OPERATION INSTRUCTIONS
1. Install the oil hose between oil cylinder and power unit, connect well the power
supply wire. The machine can be ready to use.
2. The roller must be disengage when lifting vehicle
(See Fig.17)
. To raise and lock the
lift: Press the button up till the lift is raised to the required height and the locks are
in engaged
(See Fig.15)
, then push release handle of the power unit, the lift would
be locked.
3. To lower lift
：
Press the button UP, until the safety lock is in the released position
(See
Fig.16)
, lower lift by pushing lowering handle.
4. Move lift: Pull up roller bracket, lock two roller to the lift with roller shaft.
(See Fig. 16& 17 )
.
Moving the lift by the power unit stand.
Fig.15
Fig.16
Fig. 17
Fig. 18
Roller Assy. disengaged
Roller Assy. engaged
