AMG Systems Ltd. reserves the right to make changes to this
document without prior notice. The information herein is believed to
be accurate. No responsibility is assumed by AMG Systems for its use.
Page 3
AMG9050 Series Instruction Sheet D18914-02
Mounting
The AMG9050 must be securely mounted in an AMG Systems subrack or stand alone by using the
optional surface mounting bracket. Ensure a free air space of a minimum of 10mm surrounds the unit
and that the cooling slots are not covered. For best performance the unit should be mounted with the
cooling slots vertical as shown below:
Warning:
This unit must be protected from water ingress
Technical Specifications
Standards
IEEE 802.3i 10Base-T
IEEE 802.3u 100Base-TX
IEEE 802.3ab 1000Base-T
IEEE 802.3af Power over Ethernet (PoE)
IEEE 802.3at Power over Ethernet (PoE+)
Interface
LED Indicators Power (Green)
Per Port: 10/100/1000/Act (Green)
PoE (Amber)
Ethernet
Auto MDI/MDIX
5x RJ45 Ports
Front: 4x PoE 10/100/1000T
Rear: 1x 10/100/1000T
AUX Power (no PoE)
Input Voltage DC +15V
6.3 Watts max @ 1000Mbps
Recommended PSU:
AMG2001 PSU
PoE (IEE 802.3af)
Input Voltage: DC +48V nominal
65 Watts max @ 1000Mbps
Output Power: 15.4W max (max load 12.95 W) per port
Recommended PSU:
Contact AMG Systems
PoE+
Input Voltage: DC +56V nominal
126 Watts max @ 1000Mbps
Output Power: 30W max (max load 25.5 W) per port
Recommended PSU:
Contact AMG Systems
General
Operating Temperature: -20
o
C to +70
o
C
Storage Temperature: -20
o
C to +85
o
C
Ambient Relative Humidity: 0% to 95% (Non-condensing)
Mechanical
Casing: IP 30 Protection Metal case
Dimensions (L x W x D):
Standalone 182 x 108 x 32 mm
Rack mount 170 x 108 mm x 32mm (3U)
Weight: 1kg
Installation: Subrack or Wall Mount
Regulatory
EN55022 Class A
EN61000 Class A
Support
www.amgsystems.com
email... [email protected]
Tel....... +44 (0)1767600777
©
AMG Systems Ltd
3 The Omega Centre
Stratton Business Park
Biggleswade, Bedfordshire
United Kingdom SG18 8QB
