Installation
Squid PCI Express Gen 3 Carrier board for 4 M.2 SSD modules (B series), Hardware Manual, Revision 1.0
Page 8
4
Installation
4.1
Carrier board installation
Following steps provide the exact sequence that needs to be followed in order to properly install
the Amfeltec PCI Express Expansion Carrier Board:
•
Turn OFF computer before installation
•
Remove the chassis cover from the computer
•
Locate an unused PCI express slot and remove the corresponding slot cover from computer
chassis
•
Plug-in Carrier Board to PCI express slot and attach its bracket to the computer chassis with a
screw
•
Put the chassis cover back on the computer
•
Turn ON computer
•
Before start to use Carrier board make sure that on the BIOS PCI express connector with
Carrier board is configured as x4/x4/x4/x4.
Summary of Contents for B Series
Page 4: ......
