TECHNICAL INFORMATION / INSTALLATION INSTRUCTIONS
AMF SOUNDMOSAIC
TV_701e 09-2007
Sound Mosaic
4
Image 8
Image 9
Image 10
Irrespective of the technical specification this volume of 90dB is sensed as either too high
(loud) near the loudspeaker or as too low (quiet) at some distance.
Interference for individual frequencies as it is customary with conical loudspeakers through the
interaction of sound waves does not occur with the AMF SOUNDMOSAIC due to its special
technology.
LAY-OUT
Considering an ideal intelligibility of
speech and an even sound level (constant
distribution of sound intensity in a room)
an AMF SOUNDMOSAIC can acoustically
cover an area of 10x10m. Principally,
however, at least two modules should be
provisioned for per room for adequate
reproduction of stereophonic sound.
CONNECTION
The AMF SOUNDMOSAIC can be connected to
any common amplifier. Please consult the
“
AMPLIFIER
” chapter for the corresponding
output setting. By standard, up to four modules
can be connected to most common amplifiers.
Should this be insufficient for the desired
application, a greater multitude can be
connected through a combination of individual
elements. It is important to ensure that the total
resistance of elements connected in one strand
matches the total resistance of each of the
other strands.
Overall, the resistance should not be less than
at least 4
Ω
and should not exceed 8
Ω
.
Note:
It is important that all connections (strands) are
operated with the same Ohm value
(resistance).
Image 7
