Installation / Commissioning
Electric Step
Page 17 of 28
4
Installation / Commissioning
The Electric Step must be installed in accordance with the
AMF-Bruns Installation Instructions applicable to the vehi-
cle in question.
DANGER!
Risk of danger through incorrect installation.
A number of risks of personal injury and material damage
can be caused if the Electric Step is incorrectly installed in
the vehicle.
Such risks of danger can not only occur during installation
but also as a result of installation not being carried out cor-
rectly.
Therefore:
The Electric Step must only be installed by trained, spe-
cialist personnel. This also applies to the electrical con-
nections.
The vehicle manufacturer's body fitting guidelines must
be adhered to.
A technical expert must be called in to inspect that
installation has been carried out correctly and that the
safety devices are effective.
The Electric Step must not be used until this has been
done.
