
BEDIENUNGSANLEITUNG / INSTRUCTION MANUAL AFX4 XP
26
GYRO CALIBRATION
1.
When flying yaw, first land and calibrate the gyroscope.
2.
When calibrating the gyroscope, the aircraft must be placed on a level ground.
3.
The indicator light will flash quickly during the calibration process, the indicator light
stops flashing to take off
REPAIR INSTRUCTIONS
Remove the propeller with a hex wrench, be careful not to
be too tight when installing the new propeller.
When replacing the tail rod, pull the plug backwards
forcefully, pay attention to the direction when installing,
and align the power cord with the hole.
Unplug the plug, then twist the motor left and right to pull
out.
Pull out the landing gear downwards and
press the corresponding holes when
installing.
Pay attention to the connecting rod direction
when disassembling and replacing the servo,
When replacing the receiver, remove the double-sided tape together, align the
new receiver with the edge of the rack and stick it tightly without skewing, and
then connect the servo and the motor in the order of the plugs.