BEDIENUNGSANLEITUNG / INSTRUCTION MANUAL SUPER DIMONA
24
The battery capacity is too low for the weather
conditions.
Replace the battery or use a battery with more capacity.
The receiver does not bind to the
transmitter (binding process).
The transmitter is too close to the receiver.
Move the transmitter a few meters from the receiver (see
transmitter manual).
The aircraft is too close to large metallic objects.
Do the binding process elsewhere.
The binding operation was not performed correctly. Bind transmitter and receiver according to your
transmitter's manual.
The flight battery or the batteries in the
transmitter are too empty.
Charge the battery or replace the batteries in the
transmitter.
The esc is switched off.
Turn on the esc.
The receiver does not bind to the
transmitter (after the binding process).
The transmitter is too close to the receiver.
Move the transmitter a few meters from the receiver (see
transmitter manual).
The aircraft is too close to large metallic objects.
Do the binding process elsewhere.
The binding plug has not been removed (if this
method is used for binding).
Remove the binding plug.
The flight battery or the batteries in the
transmitter are too empty.
Charge the battery or replace the batteries in the
transmitter.
The transmitter is connected to a different model. Switch the channel and bind the receiver to the
transmitter again.
The esc is switched off.
Turn on the esc.
A rudder does not react.
Servo, servo horn or rods is damaged.
Replace damaged parts.
Cable is damaged or plug is defective
Repair or replace the cable. If necessary, replace the
plug.
The transmitter is not connected correctly to the
receiver or the wrong channel is set.
Select the correct channel and try binding again.
BEC of the controller is damaged.
Replace the esc.
Controller is switched off.
Turn on the controller.
Servo reversed.
Transmitter settings are reversed.
Adjust the direction on the transmitter accordingly.
The motor turns, then it loses power.
The slider uses soft Low Voltage Cutoff (LVC).
Charge the battery.
The weather conditions are too cold.
Fly in warmer weather.
The battery is too old or damaged.
Use another flight battery.
The C-rate of the battery is too low.
Use a battery with at least 30C.
Summary of Contents for 24104
