BEDIENUNGSANLEITUNG / INSTRUCTION MANUAL F16B
20
BINDING TRANSMITTER & RECEIVER
To establish the connection between the transmitter and receiver, proceed as follows.
Connect the battery to the receiver. The indicator light flashes.
1.
To establish the connection, switch on the remote control. The signal light flashes. Press the throttle down from the top. If the
signal lamp lights up continuously, the connection is established.
CHARGING
1.
To charge the battery, connect the battery plug to the USB charger. Connect the charger to a free socket on a PC, laptop, or
smartphone charger. The LED on the charger is off. This means that the battery is being charged.
2.
The charging process takes about 50 minutes. When the LED on the charger lights up, the charging process is complete.
ATTENTION
Attention: Charging should be supervised by an adult.
Charge on a fireproof surface or, even better, in a LiPo bag. Do not charge the battery in the airplane.
Do not leave the battery unattended while charging.
Battery compartment lock