![Amewi 22316 Manual Download Page 26](http://html.mh-extra.com/html/amewi/22316/22316_manual_2931514026.webp)
Das Auto Fährt nicht, bewegt sich nicht, was tun? Hier die grundlegensten Fehlerquellen:
The car does not move, what to do ? here you find the most reasonalble explanations:
Fehler / Problem
Lösung / Solution
Auto fährt nicht rückwärts /
Car does not drive backward
Auto bremst nicht / Car does not brake
Auto lenkt nicht / no steering function
Auto lenkt, aber Servo macht Geräusche /
Car steering works , but makes strange noise
Auto lenkt nicht, anderes Servo
am Empfängerkanal eingesteckt funktioniert /
Car does not steer, another servo inserted to this
Transmitter channel works
Auto fährt nicht, Regler LED leuchtet
beim Gasgeben /
Car does not move, ESC LED is blinking
on throttle input
Gastrimmung so stellen, dass das Auto kurz vor dem
Anfahren nach vorne ist / set throttle trim, so that
the car almost drives forward
Gastrimmung so stellen, dass das Auto kurz vor
dem Anfahren nach vorne ist. Regler/Bremese
programmieren. / set throttle trim, so that the car
almost drives forward or reprogram ESC/Brake.
DR(Dual Rate) Regler am Sender prüfen
dieser steht evtl. auf NULL Ausschlag
DR(Dual Rate) trim on the Transmitter: maybe its
value is zero, please adjust.
Servogetriebe defekt, keine Gewährleistung
Servogetriebe tauschen oder Servo / servo gear
might be deffictive, no warranty, please change
gear or replace servo.
Servoelektronik defekt, bitte ausbauen
und falls im Rahmen der Gewährleistung, an
Ihren Händler einsenden. / servo electric defective,
please send -if warranty- to your dealer.
Bitte Motor prüfen: ausbauen, brushed Motoren:
Akku anschließen -Motor dreht = ok ?
Brushless: 3 Kabel zusammenhalten ohne Strom,
dreht der Motor schwerer als wen ndei kabel nicht
zusammengehalten werden ist er ok. / please take
motor out of car and check: brushed motors: give a
voltage to +- and see if its running. Brushless:
connetct the 3 cables and turn the motor by hand,
it should be felt more stronger toque then without
connecting the cables and turning -then all is ok.
8. Fehlerdiagnose / Problems and Solutions