Ametek Western Research IPS-4, User Manual

Page: 49 / 238

Installation and Start-Up | 3-1
INSTALLATION and START-UP
The Installation and Start-Up chapter contains information about the fol-
lowing topics:
• Where to find safety information in this guide before working with
the analyzer.
• How to store the analyzer before installation.
• How to uncrate and inspect the analyzer for damage before installing
it.
• Tools, equipment, and supplies required for installation.
• How to install the mechanical components and sample lines, and per-
form a leak check on all of the fittings and connections before power-
ing up the analyzer.
• How to make all of the required electrical connections.
• How to apply power to the analyzer and configure it for operation.
• What to expect during normal operation.
The installation of the analyzer must be in accordance with all of the
customer (end user) and local regulatory standards and procedures.
There are no operator-serviceable components inside the analyzer.
Refer service requirements to qualified personnel.
!
WARNING